- Видео 19
- Просмотров 1 613 462
Haunted Hows
США
Добавлен 24 апр 2017
Welcome to "Haunted Hows" (that's a play on words) Here you will find videos on how to run a Haunted House, build props, create scary scenes and anything else that a haunter might use to make Halloween the greatest time of the year!
Ms. Debbie and I (Mr Dale) have been running the Hillbilly Haunted House since 2016, and I have more than a decade of experience in the haunted attractions industry. We hope our tips and tricks will help you have a great experience wether you run a haunt, or just want to take your Halloween decorating to the next level!
Ms. Debbie and I (Mr Dale) have been running the Hillbilly Haunted House since 2016, and I have more than a decade of experience in the haunted attractions industry. We hope our tips and tricks will help you have a great experience wether you run a haunt, or just want to take your Halloween decorating to the next level!
Tree Service from Timber Valley Tree Co.
We Had a Maple tree services by Timber Valley Tree Co. They did an excellent job. Very professional.
timbervalleytreeco.com/
timbervalleytreeco.com/
Просмотров: 31
Видео
The Distraction SCARE! The best type of Scare.
Просмотров 496 месяцев назад
Curious about how distraction scares work? Join us in our first episode as we take a closer look at the mechanics behind this type of scare. Using a prop TV we've constructed ourselves, we'll demonstrate how misdirection can create a moment of suspense and surprise. Follow along as we break down the elements of a distraction scare, from the initial setup to the payoff. I also discuss how import...
Rat Cage
Просмотров 1533 года назад
I took a dollar store rat skeleton, some dollar store foam core board, and some dollar store skewers, and made an awesome Halloween decoration. The tricky way I cut out a perfect circle in the dollar store foam core is probably the best idea I've come up with in a while.
R/C Wheelchair With Skeleton!
Просмотров 4353 года назад
The Anatomical chart company sells the Bucky Budget Skeleton. These are kind of low end castings of their more medical, and museum grade skeletons. They are cast in resin from, I believe, an actual human skeleton. Although they are very detailed, and make an awesome prop for you haunt, they are quite heavy, and difficult to move around. We put our skeleton, Grampa, in an old wheelchair and used...
Tower Of No Evil / Halloween prop
Просмотров 1373 года назад
This Halloween decoration is a quick build using a few "Bag of Bones" that you can get at most stores with a Halloween section. Most of the supplies are things we had laying around, but you could easily get everything from any big box store. Be creative and have some fun this Halloween!
Hillbilly Haunted House 2020 cancelled
Просмотров 2864 года назад
Sorry. No show this year. Next year will be twice as good!
Trophies for our volunteers!
Просмотров 1274 года назад
Every year, sometime in December, we throw a thank you party for our Haunted House volunteers. There is no way the Hillbilly Haunted House could succeed without the high school students who donate their time to our show. During this party, we have an awards ceremony, and hand out trophies to some of our most creative, helpful, and terrifying, volunteers. We just take some dollar store trophies ...
HILLBILLY Commercial
Просмотров 1984 года назад
This is the commercial we had made for The Hillbilly Haunted House. We don't have a channel for our Haunted Attraction and needed a place for this to live, so here it is.
Halloween Cut outs. (Really old video)
Просмотров 654 года назад
This was one of our very first videos. It lived on my other RUclips channel ruclips.net/channel/UCyjdp54kC6GZIJs-xEzuzYw TNABI (aka That's Not A Bad Idea) for a long time, but I figured I should just move it over onto this one because it is pretty relevant. It's really pretty bad, but hey, it was a first attempt. Still I hope you can get something out of it. Or at least you can cringe with me.
Dollar Store Bell Jars/Specimen Cloches
Просмотров 1,3 тыс.5 лет назад
Bell Jars, or Specimen Cloches, are a Halloween and Haunted House must. If you have a mad scientists lab, a creepy library, or spooky curio cabinet, you'll want to populate it with weird objects under glass, or in this case plastic. let me show you how to make these great looking props from items you can get at the dollar store. If you don't have a shop full of power tools at your disposal, lik...
POP Panel -- not your standard DROP Panel
Просмотров 2,3 тыс.5 лет назад
Take a tour of the awesome Pop panel we made for the Hillbilly Haunted House. This isn't your standard Drop panel, it goes up not down. and because of this, gravity is your friend instead of being a problem in a standard drop panel.
Halloween Coffin - One sheet of plywood
Просмотров 18 тыс.6 лет назад
The Toe Pincher Coffin is an iconic image that every Haunted House needs. Here is a (mostly) step by step video that will show you how to make your own from a single sheet of plywood. This technique doesn't require any special tools and utilizes some clever ways to join the angled sides without any complicated beveled cuts. Please feel free to ask question in the comments and share any tips you...
Make Your Own Zombie Alarm
Просмотров 2,7 тыс.6 лет назад
In our Haunted House we have a Zombie cage full of, well, Zombies. When our customers pass the cage the Zombie Alarm goes off and all the Zombies come pouring out of the cage. This Zombie alarm is made with mostly garage sale finds and a couple inexpensive Amazon purchases. All together I think it cost us less than $25.00. It may not be something you need but I hope the video can give you some ...
Here's a Great Way to Hang Scenesetter and Lights
Просмотров 1,4 тыс.6 лет назад
Do you need a quick and easy way to hang your backdrops and string lights in your haunted attraction? Here you go. These easy to make plastic tabs can be used in all sorts of way around your show. If you ever need to staple cloth or plastic to walls or frames these plastic tabs will make your job much easier.
DIY Halloween prop //Rat corpsing.
Просмотров 6 тыс.6 лет назад
Ms. Debbie is going to show you how to turn a Dollar store rat skeleton in to an awesome corpsed out Sewer Rat. These techniques can be used for corpsing any small skeleton. All you need is some liquid latex, a few sheets of tissue, hobby paints and maybe some fake fur, to get great results. Thank you for watching.
This is exactly the tutorial i needed, clear and concise!. Thank you very much and i hope yall have a good day <3
Please I would like to know which type of paper Or any paper
It's just regular printer paper
Im confused as to how you get a door and a back with your instructions --- your diagram only shows getting one or the other, unless I am mistakenly reading it.
Hello merci pour la vidéo j'ai essayé mais ça n'a pas marché mon imprimante Epson ecotank et j'ai pris le papier de mon imprimante qu'es-ce qui ne marche pas merci de Ton aide
One of the msot hilarious creations ever
Easy and effective!!! Thank you. Gonna try it out.👻
Can a inkjet printer
Do u have to use laser print for this to work?
Yes. Or a copier. Anything toner based should work. But I don't think anything ink based will.
Toner is made of polyester, so simply ironing the dry shirt from the back will make it permanent. Also, other solvents will work, Ive used xylene.
I think you meant polystyrene. I think you are correct, ironing will help, and any solvent that melts the toner should work.
Are you using A4 paper?good job
Well, I'm in the US so it's letter sized, 😏 but Yes it's just plain copy/printer paper. Noting special.
also, there are some xerox printers that use wax, would that work instead of a laser print?
Interesting question. I'd imagine that would require heat. Almost like an iron on. Never tried it but might look into it.
even though its not permanent im still gonna try I totally love it, plus there are some great suggestions on how to make the print stick longer. cant wait to try. thank you
Did u try it
Have you tried this with a screw press, or a heat press?
i will use "not permanent for very long" regularly from now on
Well, it was our first video and it wasn't scripted. Lol. But to be fair that original shirt still has a visible image. Extremely faded, but it's there. Lasted longer than we expected.
Love this variation! Much more descreste and better for the operator to vary how fast it opens rather than just relying on gravity like a standard drop panel. Plus no need for a latch system. The only concern would be if the operators hand accidentally slips and the panel falls when a head, arm, or hand is through the open panel area. Could have yourself a little guillotine!
It's not really heavy enough. But it's a good point. Keep your fingers clear 😉
Is there any way you can change the eye color on the jumping spider?
No you cant
Any chance you have the specs and instructions saved as a pdf that you could share?
Does it wash off?
It fades, but never washes out completely.
Can i wash it?
How about washing this T-shirt
It'll wash out over time. But never completely. I still have the original shirt from that video, and you can still see the image.
i have been wanting to make one of these for years but with abit more battery life, a car horn and or water sprayer and would want to controll it using a single hand controller, probably a nintendo nun chuck controller wired to a remote into a pocket if you can get a smaller remote or in a back pack
Do you have a shop?
Doesn't everybody? I suppose it depends on what you mean by shop? Like a internet shop so you can buy stuff from me? Or a workshop so you can commission something form me?
I like the part where they put the t-shirt on the board.
IDOL THAT IS NOT FADE FOR LAUNDRY?
It will fade when you wash it.
not even close to working for me ... ist my laser jet toner printer?? my acetone ...😞
Hmm. Laser jet is usually an ink type printer, not toner. It's a confusing name. However, some people have said certain types of toners don't work either. I'm sorry.
@@HauntedHows it must be one of this kinds of toners its a Brother dl-52... something , anyway, I tried a regular fotocopy and DID WORK as suggested in the video!!! Thanks 😊
I'm happy it worked out.
Love it, thank you!
You're welcome
Can you you 100% acetone for nail polish???
Sure. It's more expensive that way but will work.
Is that ordinary paper ?
Yep, sure is.
Wow so thank you. I like this way.
👍
This can be used for a Jason cosplay
Sure can!
thank you
Whats that paper name plzzzz
Nothing special, just standard printer paper.
I had no clue we had award ceremonies 🤯
We usually have a party with game club in December and do a small awards thing then. We try to make sure everyone knows. 🎃
Thank you for the video. I am trying to build one of these myself. I found the SD media players. They run at 5 volts. I remember you saying the power supply was 9 volts. O am assuming the extra voltage was for the light and speakers? I can't seem to find a low voltage spinning light. Do you have the places where you found the parts?
I got the light at a garage sale. It's off a plow truck or something. I had to buy an LED bulb for it so the power supply could handle it. Most of everything else other than the mp3 player I just had in my junk pile, (aka my shop) I'll see if I can find a link to a light that will work.
Okay. You used to be able to get these rotating lights everywhere. But now all I can find are flashing ones. However... www.amazon.com/dp/B06XXWFGMZ/ref=cm_sw_r_cp_apa_glt_i_PT1M3C1EEQTVCC8E19C9?_encoding=UTF8&psc=1 Basically makes my video superfluous. LOL 😆
@@HauntedHows I like yours better because we get to choose the alarm sound. I am doing one for my boys room. It will go with a nerf gun zombie apocalypse wall. So if I get a voltage cord to line up with the combined voltage of the devices, it should work, right? Just don't want to start a fire LOL. It the charger voltage is MORE than the combined voltage of what's on it, wont it fry your devices?
I'm not an electrician, so no comment. 😏 That being said, if I remember correctly, everything I was running was basically rated for 12v. And the power pack I had was 9 or so. And I think I ran everything in parallel. I'll look at it again and get back to you.
@@HauntedHows ok thank you. When you say "rated for 12v" do you mean like, the media player for examples can say, runs at 5v, but it is rated for 12v, meaning a plug up to 12v will run it safely? I am clueless. Thank you again.
Hello ! I tried this and it did not work , what should i do ? ! ( I used acetone and laser printer )
Not sure why it didn't work. I've been informed that some toner in some printers doesn't work. What brand of printer did you use?
@@HauntedHows I used HP135W (Laser)
Weird. Maybe the toner is different in the HP than in the brother printer we use. You can try making a copy on a copy machine at the library or a copy shop and use that. I'm sorry it's not working for you.
@@HauntedHows Thank you !!
Does it wash off
It fades over time, but doesn't seem to ever wash out completely
Maam whats the name of black tool
It's just a plastic putty knife. You can get one at any store that sells paint.
Good to Know this.. We Print More than 100+ Options for Ours T-shirts, Hoodies, Polos & Sweatshirts.. It's Good to See this Kind of Small Scale Printing.. Regards, Future Gen Apparels INDIA
Very cool.....but you spelled house wrong :)
The Google and RUclips search engines think so too. 🙂
"A distinction is commonly drawn between "coffins" and "caskets", using "coffin" to refer to a tapered hexagonal or octagonal (also considered to be anthropoidal in shape) box and "casket" to refer to a rectangular box, often with a split lid used for viewing the deceased" - Wikipedia. Also, a casket was originally considered a box for jewelry. Coffin is any box used for burying a body.
Thanks.
This is great
Thanks. 👍
I am quite happy that it fades after a few washes, because it gives a nice vintage look, especially on a faded tee
We agree. The shirts we made in that video were for a convention. We were representing our Haunted attraction... The Hillbilly Haunted House. As Hillbillies we can't have brand new looking shirts! LOL
Made one for my neighbor this week from your plans. Fun build!
Cool. Happy Halloween!
I really wanna do this with my own drawings, but I was scared that the white from the picture would transfer onto the clothes.
The white won't transfer. And this technique is so simple and inexpensive that you can do some tests to be sure.
@@HauntedHows oh alright. How permanent is this, or can I make it permanent by using a sealant?
We were surprised at how long it lasted. They will fade with every wash. But the shirt in that video is still okay-ish. Looks retro. This will never be as good as a screen print, but it's not intended to be.
@@HauntedHows that sounds really cool! But I think I'll try getting my hands on some transfer paper and try with that instead.
Asmr ^~^
I was thinking the same thing. I bet if he tagged this with unintentional asmr the algorithm might pick this up 😁
I Always look forward to your videos! Are you on reddit? (need your own community!!!)
No, don't have a subReddit, hard enough to keep up with the RUclips channel! We are planning 2 more videos before Halloween. Maybe more.
@@HauntedHows I would love to make a fan page if that's ok, if not, not worries :D
I appreciate it, but no thanks.
Rock, Paper, Scissors, BAM! Ya'll are silly haha. Awesome build!
Thanks
very cool thanks for sharing !! HFL!!
You're welcome. I was told the volume was really low. How did it sound to you?
@@HauntedHows sounded just fine to me
Thanks
Volume is really low
Really? I check our videos on multiple computers and devices before I upload. I was having some trouble with the upload to RUclips so I'll check it out. Thanks for the heads up.